GSoC, RTEMS, Software

GSoC 2018: Final Report

This is the final report of the work done under GSoC’18 with the RTEMS community. I’ll begin with a short summary of all the work done during this summer and will then move towards the corresponding code and documentation developed throughout the timeline.   Porting SDIO driver to RTEMS and benchmarking Student:- Udit kumar Agarwal Mentors:- Christian Mauderer , Punit Vara Original proposal link: Here Weekly updates:- https://devel.rtems.org/wiki/GSoC/2018#UditkumarAgarwal Project tickets:-  ticket#3429 , ticket#3430 , ticket#3428 Github Repository:– https://github.com/madaari/GSoC-rtems-18…

Continue Reading

ARM, Benchmark, File system, FIO, GSoC, RTEMS, Software

Benchmarking RTEMS Filesystems using FIO

Hi, In this post we will explore FIO’s RTEMS port and how it can be used to benchmark RTEMS filesystems and drivers. First, let’s have a quick look at all the RTEMS filesystems: RTEMS FILESYSTEMS RTEMS supports mainly two types of filesystems : Network and Physical fs. Benchmarking support for networking filesystems isn’t yet available. However, nearly every other physical filesystem can be benchmarked and contrasted. Heap based file systems are those which uses malloc() for file…

Continue Reading

CAM, GSoC, mmccam, RTEMS, SDIO

RTEMS SDIO driver: Current progress

Hi, this post mainly concerns with the current progress of SDIO driver’s implementation on RTEMS. In a nutshell, driver is able to detect, initialize the type of card. However, the part concerned with registering the partitions of the card as RTEMS disks is still buggy. So, I’ll discuss some of the bugs which were previously resolved and the ones that are still left. Starting with a very short introduction of how MMCCAM driver is being interfaced with…

Continue Reading

Benchmark, FIO, GSoC, RTEMS, Software

[GSoC Phase-1] Porting FIO to RTEMS

Hi all, This post covers most of my learnings during phase one of GSoC with RTEMS. My main goal of phase 1 was to port an IO benchmark to RTEMS. Towards this, various benchmarks were compared and fio was finalized for the import. FIO is a pretty much widely accepted and highly configurable IO benchmarking tool, which supports a number of large number of different OS and now RTEMS is among one of them. Following were the…

Continue Reading

Benchmark, Bonnie++, FIO, FreeBSD, GSoC, IOZONE, RTEMS, Software

Comparing IO benchmarks: FIO, IOZONE and BONNIE++

IO benchmarks refer to the computerized test for measuring various properties of a IO device under various conditions. Various properties includes Read/Write speed, IOPS, seek time etc and various conditions refers to random/sequential reads/writes, block size used by the filesystem, buffer cache size etc. There are various IO benchmarks available online, but the top 3 opensource IO benchmarks, in my view includes FIO, IOZONE and BONNIE++. There are several pros and cons for each of them, which…

Continue Reading

RTEMS, RTOS, Software

Coding conventions : RTEMS

From my experience till now, If you desire to contribute to open source, it’s necessary to adapt!! Your old sluggish, inconsistence coding practices wont do any good, neither to you nor to the community. ^^ That was my story!! After a month of working with professionals , I realized that my 5 years of coding was trash! It’s not about logic, it’s about ethics. To be a good coder, you don’t only need to work on your…

Continue Reading

Hardware, RTEMS, RTOS, Software

Building and testing RTEMS-libbsd for BeagleBone Black BSP

———————————————————————— Building and testing libbsd for BeagleBone Black BSP ———————————————————————— == Installation overview == === Initial setup === – Jump into your workspace and make a directory named sandbox This folder will contain all our project files – cd sandbox/ – export sandbox=$PWD – git clone git://git.rtems.org/rtems-source-builder.git – git clone git://git.rtems.org/rtems.git – git clone git://git.rtems.org/rtems-libbsd.git === Building desired toolset for ARM === – cd rtems-source-builder/rtems/ – ../source-builder/sb-check – ../source-builder/sb-set-builder –prefix=$sandbox/5 5/rtems-arm – cd $sandbox – export PATH=$PWD/5/bin:$PATH…

Continue Reading