Author: Udit kumar agarwal

File system, Hardware, NAND/NOR

Effect of file-system on sd card’s performance

Udit kumar agarwal / March 25, 2018

I had a task to compare different protocols( and their different implementations) like SD, SPI, SDIO(in FreeBSD’s MMCCAM implementation) by accessing SD Card. Now, for unbiased comparison, I must eliminate file system type in sd card from the equation. In this blog post, I’ll discuss/share my findings of the file-systems used for the card(SD and MMC) and how they affect its performance. So, let’s start with a very quick introduction to some basic concepts: Introduction MMC- Multimedia Card is a memory card unveiled in 1997 by SanDisk and Siemens based on NAND flash memory. eMMC is a regular MMC in…

Continue Reading→

CAM, FreeBSD, mmccam, SDIO, Software

Implementing a MMC/SD/SDIO stack using CAM framework(Part 2)

Udit kumar agarwal / March 21, 2018

Hi, In the next part lets look at other files which makes up the SDIO stack within mmccam framework. Please have  a look at previous part for more info: https://uditagarwal.in/index.php/2018/03/19/implementing-a-mmc-sd-sdio-stack-using-cam-framework/ mmc_sdio.c +void sdio_fill_mmcio_rw_direct(union ccb *ccb, uint8_t f, uint8_t wr, uint32_t adr, uint8_t *data) { + struct ccb_mmcio *mmcio; + + CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, + (“sdio_fill_mmcio(f=%d, wr=%d, adr=%02x, data=%02x)\n”, f, wr, adr, (data == NULL ? 0 : *data))); + mmcio = &ccb->mmcio; + + mmcio->cmd.opcode = SD_IO_RW_DIRECT; + mmcio->cmd.arg = SD_IO_RW_FUNC(f) | SD_IO_RW_ADR(adr); + if (wr) + mmcio->cmd.arg |= SD_IO_RW_WR | SD_IO_RW_RAW | SD_IO_RW_DAT(*data); + mmcio->cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; +…

Continue Reading→

CAM, FreeBSD, Hardware, mmccam, SDIO, Software

Detailed SDIO protocol Implementation

Udit kumar agarwal / March 19, 2018

Reference: Wikipedia, https://www.sdcard.org/developers/overview/sdio/sdio_spec/Simplified_SDIO_Card_Spec.pdf  SDIO cards are intended to provide high-speed data Input/Output on our regular sd card slot. SDIO cards are compatible with any sd card slot and will not cause any physical damage to the host if it’s not compatible with SDIO. When SDIO is plugged in an SDIO compatible host, in its early stage it is in low power mode and consumes very little current. The host identifies the SDIO card, it’s power requirement, it’s I/O capabilities, etc. If the host finds that the power requirement is manageable and there is a driver for the I/O functionality card…

Continue Reading→

CAM, FreeBSD, mmccam

Implementing a MMC/SD/SDIO stack using CAM framework(Part 1)

Udit kumar agarwal / March 19, 2018

In this blog post we will have a detailed look at all the files added/changed while implementing the MMC/SD/SDIO stack via CAM framework. We will basically discuss the commit  https://github.com/freebsd/freebsd/commit/a87c7a85be3e3727b6b08b19741b4282f942400d which aims at adding MMC/SD/SDIO stack to FreeBSD’s already existing CAM framework. So, lets start one by one with each file: mmc.h #ifndef CAM_MMC_H #define CAM_MMC_H #include <dev/mmc/mmcreg.h> /* * This structure describes an MMC/SD card */ struct mmc_params { u_int8_t model[40]; /* Card model */ /* Card OCR */ uint32_t card_ocr; /* OCR of the IO portion of the card */ uint32_t io_ocr; /* Card CID — raw and…

Continue Reading→

CAM, FreeBSD

Understanding FreeBSD’s CAM Framework

Udit kumar agarwal / March 18, 2018

This blog post presents a gist of Free BSD’s doc on CAM(here) and chapter 14 of the book FreeBSD device driver- A guide for intrepid. It gives an introduction to the CAM(Common access method), it’s applications, it’s working and it’s organization in FreeBSD. It is written to get myself a really good understanding of mmccam stack which is nothing but SDHC/SDIO protocols wired within the CAM framework. COMMON ACCESS METHOD CAM is a method for separating HBA adapters from storage adapters and is primarily used for SCSI. By separating these drivers it reduces the complexity of both the drivers.Furthermore, this…

Continue Reading→

Hardware

Understanding SD, SDIO and MMC Interface

Udit kumar agarwal / March 17, 2018

TL;DR; MMC and SD-card have the same physical and electrical specifications but different software controls. They both are used as storage devices only. SDIO and SD-Combo cards, on the other hand, incorporate Input/Output functionality (like Bluetooth, Wifi, GPS, etc) without and with the storage facility respectively. So, an SD-Combo card can act as a wifi adapter along with a storage device. In this blog post, I will present a summary of the following document http://www.kaltech.co.il/pdf/Eureka_sd_wp1.pdf. This is meant for anyone willing to understand how removable devices like sd cards work and the different protocols/functionalities they support. Secure Digital (SD) memory…

Continue Reading→

Hardware, RTEMS, RTOS, Software

Building and testing RTEMS-libbsd for BeagleBone Black BSP

Udit kumar agarwal / March 10, 2018

———————————————————————— Building and testing libbsd for BeagleBone Black BSP ———————————————————————— == Installation overview == === Initial setup === – Jump into your workspace and make a directory named sandbox This folder will contain all our project files – cd sandbox/ – export sandbox=$PWD – git clone git://git.rtems.org/rtems-source-builder.git – git clone git://git.rtems.org/rtems.git – git clone git://git.rtems.org/rtems-libbsd.git === Building desired toolset for ARM === – cd rtems-source-builder/rtems/ – ../source-builder/sb-check – ../source-builder/sb-set-builder –prefix=$sandbox/5 5/rtems-arm – cd $sandbox – export PATH=$PWD/5/bin:$PATH After having required toolchain, we can now proceed towards building our Board Support Package(BSP) === Building Beagleboneblack BSP === – cd $sandbox –…

Continue Reading→

Software, Webpage

Semi dynamic webpage template

Udit kumar agarwal / October 30, 2017

    Semi dynamic webpage template with Google sheets integration INDEX Introduction Purpose Behind Proposed Work Experimental Results Conclusion References     Introduction   Our project aims at providing a semi-dynamic template of a fully fledged highly responsive webpage for small scale organizational usage. With improved security considerations and better organization this project integrates google sheets services as a database for a website. Google sheets being easy to deploy and use makes content updation easier and a lot more user friendly. Several other functionalities like Google scripting engine along with google forms can be very easily integrated with google sheets…

Continue Reading→

Hardware, Software

Introduction to RF communication

Udit kumar agarwal / October 15, 2017

This post introduces the basics of RF communication along with various band specifications used for wireless communication. It also covers comparison of  different bands on basis of their data rates and other parameters. Content Introduction Available frequency Bands Types of RF communication Different wireless protocols Introduction Now a days, we are surrounded by a large number of wireless devices working on different protocols, on different frequency bands thus utilizing almost whole of the “Radio-wave” frequency spectrum. Adhering to it’s high density, complete frequency spectrum can be divided into different groups and each group can be further divided into different channels.…

Continue Reading→

ARM, Software

DECODING ARM

Udit kumar agarwal / October 3, 2017

This introductory post aims at discussing a bit about business model of ARM ltd.(that’s right the company behind ARM architectures!!), different ARM architectures for different utilities and most importantly a brief about ARM cortex M , ARM cortex R and ARM cortex A. So, here’s the content: Business model of ARM ltd. ARM Terminology Different ARM Architectures and Families Third party ARM variants ARM cortex M ARM cortex R ARM cortex A ARM Ltd. ARM ltd. was founded late in 1990’s as a joint venture between Acorn computers , Apple computers(Apple Inc.) and VLSI technology Inc. ARM joint venture With…

Continue Reading→